* Single board, standard 38mm*38mm size
* Maximum resolution 2592*1944@18fps.
* Support one channel audio input; one channel audio output; support two-way voice speaking
* Support one channel alarm input; one channel alarm out
* Support one electric zoom interface（-Z model support）
* Support one TTL interface
* Support one USB interface
* Support one Network lamp interface
* Support Dual-Stream technology
* Support 3D DNR，DWDR， P2P
The 5MP economic single-board IP module uses the HiSilicon 3516E V300 main control chip, is equipped with a 1/2.8" CMOS sensor, and uses an advanced H.265/H.264 video compression algorithm with a maximum output resolution of 5MP. This product provides 1 power interface (expandable POE), 1 IR-CUT drive interface, 1 photoresistor signal interface, 1 SAMART IR interface, 1 network signal interface, POE support optional (-P), 1 reset interface , 1 network light interface. At the same time support 1 audio input, 1 audio output, 1 alarm input, 1 alarm output, 1 electric zoom interface (-Z models support), 1 TTL interface, 1 USB Reserved interface. Cooperate with our PC client and mobile phone client to provide system solutions for customers.
Spe Sheet
System Structure | DSP | Embedded RTOS, DSP(Hi3516E V200) |
Sensor | 1/2.9" CMOS sensor(GC2063) | |
Video Encoding | Video Encoding | H.265/H.264High Profile/Main Profile/Base Line Profile |
Maximum Image Output | Main stream：1920*1080@25/30fps ; Auxiliary stream optional | |
Streaming transmission | Two stream | |
Video Bite rate | 32Kbps~8MKbps | |
Image Enhancement | Min. illumination | Color0.1Lux@F1.2（AGC ON）； black and white0.01Lux@F1.2（AGC ON） |
Electronic shutter | Auto（1/3 to 1/10000） | |
Day/Night switch | Color/B&W/Light sensitive switch/Mixed mode switch | |
White balance | Auto / Lock white balance / fluorescent lamp /filament lamp /fluorescent lamp /HM | |
DNR | 2D and 3D DNR | |
WDR | Support DWDR | |
Video Adjust | Sharpness, Brightness, Saturation, Contrast, chroma adjustable | |
Image model | Transparent /real | |
color pattern | Standard /gorgeous | |
Corridor pattern | Support | |
Backlight compensation | Support | |
FLC | Support | |
Penetrating fog | Support | |
Smart IR | Support | |
Interfaces | Signal interface | One photosensitive resistance signal interface, one IR_CUT drive interface, support photo resistance signal links to IR-CUT and IR light |
ICR driving voltage | 5V | |
Smart IR | One port | |
Reset interface | One port | |
Audio interface | One audio in; One audio out | |
Alarm interface | One alarm in; One alarm out | |
Electric zoom interface | One port（-Z model support） | |
TTL interface | One port | |
Power interface | One DC12V power input | |
USB interface | One Port | |
POE interface | One Extended Interface | |
Network light interface | One Port | |
Network interface | One RJ45 10/100M Port | |
TF interface | One Port （External USB to TF board） | |
Functions | Motion detection | Multiple detection zones, variable sensitivity levels |
Capture function | JPEG，capture resolution is the max coding resolution | |
Security | Password protection and water marker | |
OSD | Support Channel Name and Time | |
Storage | Support FTP storage | |
Smart alarm | Network abnormal, cover alarm etc. | |
Mobile client | VSSMOBILE for both iPhone and Android system phone | |
Protocol support | TCP/IP；UDP；HTTP；IGMP ；ICMP；DHCP；RTP/RTSP；DNS；DDNS；FTP；NTP；PPPOE；UPNP；SMTP；SNMP | |
Interface protocol | ONVIF2.6/CGI | |
General | Power Supply | DC12V |
Power Consumption | <1W (without infrared lamp board) | |
Lightning Protection | Power , network, POE all lightning protection, meets with standard GB/T17626.5，and IEC61000-4-5 | |
IR_CUT pitch | 20mm | |
Size | 38*38（mm）Single Board |
Boards | Marker | Mainboard SN | Pin Definition | Pin Description | Function |
Back side | P1 | J2 | 1 | ERXTN | Network signal |
2 | ERXTP | ||||
3 | ETXTN | ||||
4 | ETXTP | ||||
5 | GND | Ground | |||
6 | +12V | 12V | |||
7 | GND_POE | POE connect ground | |||
8 | 48V_POE | 48V POE | |||
9 | GND | GND | |||
10 | LED 1 | Network Light | |||
11 | LED 0 | ||||
P2 | J4 | 1 | DN- | IR_CUT | |
2 | DN+ | ||||
P3 | J6 | 1 | +12V | 12V | |
2 | GND | Ground | |||
3 | IR_EN | IR lamp sync signal | |||
4 | GBL_RST | reset | |||
5 | PWM_OUT0 | IR light brightness adjustment | |||
6 | PWM_OUT1 | ||||
P4 | J3 | 1 | AOUT1 | Electric zoom interface（-Z model support） | |
2 | AOUT2 | ||||
3 | BOUT1 | ||||
4 | BOUT2 | ||||
5 | COUT1 | ||||
6 | COUT2 | ||||
7 | DOUT1 | ||||
8 | DOUT2 | ||||
P5 | J1 | 1 | AC_LINE | Audio in | |
2 | GND | Ground | |||
3 | AC_OUT | Audio out | |||
4 | UART1_RXD | TTL interface | |||
5 | UART1_TXD | ||||
6 | ALARM_OUT | Alarm out | |||
7 | ALARM IN | Alarm in | |||
8 | GND | Ground | |||
9 | USB_DP | USB differential signal DP+ | |||
10 | USB_DM | USB differential signal DP- | |||
11 | USB_VBUS | 3.3V USB power |
Compound Functional Tail
QR Code
