Uface 7 Pro is the face recognition product with high performance and high reliability, which depends on the deep learning algorithm, also having the characteristics of quick recognition speed and high accuracy. This product supports 1:1 and 1:N mode, with embedded IC/ID card reader.
Features
●Industrial grade design, with stable performance and smooth lines
●Anti-backlight
●7-inch IPS touch screen
●Live face detection
●99.99% recognition accuracy 1 (99.77% recognition rate under 1% false accept rate; 99.27% recognition rate under 0.1% false accept rate)
●Embedded IC/ID card reader
●Wi-Fi
●IP65
●Recognition speed less than 1s
●50-thousand level face database (Max. 100-thousand face database)
Technical Parameters | ||
Display | ||
Display screen | 7-inch IPS touch screen | |
Resolution | 1024 * 600 | |
RGB camera | ||
CMOS | 1/2.7" progressive scan CMOS | |
WDR | 120dB | |
Resolution | 1932 * 1092 | |
FOV | 90° | |
Shutter type | Electronic rolling shutter | |
AEC/AGC/AWB | Auto | |
Lens | f=3.5mm, F2.0 | |
Infrared camera |
| |
CMOS | 1/2.7" progressive scan CMOS | |
WDR | 120dB | |
Resolution | 1932 * 1092 | |
FOV | 90° | |
Shutter type | Electronic rolling shutter | |
AEC/AGC/AWB | Auto | |
Lens | f=3.5mm, F2.0 | |
Interfaces |
| |
Interfaces | RS232, RS485, Wiegand26/34 Output/Input, Relay Output, TTL Output, USB Type-A, Alarm Input, Exit Door Input, QR code access, Card reader | |
Communication mode | RJ45, Wi-Fi, 4G (optional) | |
Functions | ||
Accuracy | Up to 99.99% | |
Capacity | 50,000 pieces of face images | |
Type of card reader | Standard EM/MIFARE Card | |
Records | 1 million pieces of recognition records | |
Stranger detection | Supports | |
Recognition distance configuration | Live detection: 0.3-1.5m; Non-live: 0.3-3m | |
Custom UI | Supports | |
Remote update | Supports | |
Software | Cloud, LAN | |
System parameters | ||
Operating system | Linux | |
CPU | Dual-core ARM Cortex-A7@ 900MHz | |
Storage | 512M RAM, 8GB ROM | |
General parameters | ||
Protection grade | IP65, for outdoor use | |
Power | DC 12V/2A | |
Working temperature | -10℃~60℃ | |
Storage temperature | -20℃~60℃ | |
Working humidity | 10%~90% | |
Power consumption | Max. 15W | |
Dimension | 232.00mm * 122.00mm * 38.00mm (without support) |
Dimension
Device dimension (mm)
Installation Construction
Schematic diagram of patch cord
Wiring instructions:
① Strip the wire to expose the metal wire;
②Press the orange button corresponding to the small hole, insert the metal wire end into the hole, release the orange button and fix the wire end (all subsequent wiring and so on).
Note: If the positive and negative poles of the power cord are connected reversely, the device will not start; if the positive and negative poles are connected correctly, the device will start normally; the device power adapter requires 12-16V.
1. Positive power supply
2. Grounding
3. Network cable TX+ (orange and white cable)
4. Network cable TX- (orange cable)
5. Network cable RX+ (green and white cable)
6. Network cable RX- (green wire)
7. Serial communication TXD terminal
8. Serial communication RXD terminal
9. Wiegand output ground
10. Wiegand signal 0 output terminal (Wiegand 26)
11. Wiegand signal 1 output terminal (Wiegand 26)
12. Normally closed contact, used to control the access control switch signal
13. Normally open contact, used to control the access control switch signal
14. Common terminal, used to control the access control switch signal, wiring according to requirements
Instructions for use
The distance between personnel and equipment can be adjusted according to the height. The taller people should stand backwards, and the shorter ones should stand forwards. 0.5m~2m are good recognition distances. Seen from top to bottom, with the device as the center of the circle, it is identifiable within a distance of 2m.
QR Code