* Adopt 1/2.9" progressive scan CMOS sensor
* Adopt advanced H.264/H.265 video coding algorithm with high compression
ratio to achieve low bandwidth and high image quality
* Maximum resolution 1920*1080@25fps/30fps
* Support 2D/3D DNS and DWDR
* Support interested area（ROI）
* Adopt high efficiency infrared light, IR range: 20 meters
* Support POE power supply function
* Protection grade is IP67
2.0MP H265 Economic Mini Bullet IP Camera | ||
Camera | Sensor | 1/2.9" progressive scan CMOS sensor |
Min.Illumination | Color 0.1Lux@F1.2（AGC ON）；B&W 0Lux@F1.2（AGC ON）with IR | |
Lens | 3.6mm M12 Lens；6mm option | |
IR Range | 20 meters | |
Electronic Shutter | Auto（1/25s~1/100000s） | |
Day / Night | Auto / Color / B&W (Inside IR CUT) | |
DNR | 2D/3D DNR | |
WDR | DWDR | |
Image Adjustment | Sharpness, Brightness, Saturation, Contrast Adjustable | |
Encode | Compression | H.265 Main Profile/H.264 High Profile/H.264 Main Profile/H.264 BaseLine Profile |
Max. Resolution | Main stream：1920*1080@25/30fps；Sub stream：640*360@25/30fps | |
Bit Rate Control | Support VBR / CBR | |
Bit Rate | 32Kbps~4Mbps | |
Interface | Network Port | 1 RJ45 10M/100M Ethernet interface |
Function | Motion Detection | Multiple Detection Zones, Variable Sensitivity Levels |
ROI | Support | |
Privacy Masking | 4 Zones for Privacy Masking | |
Snapshot | Support, Resolution is the max encoding resolution | |
Security Features | Support Password, Watermarking | |
Text Overlay | Support（Channel Title, Time Title） | |
Alarm | Support Network Anomaly, Mask Alarm and etc. | |
Mobile Phone App | Support IOS and Android | |
Network Protocol | TCP/IP；UDP；HTTP；IGMP ；ICMP；DHCP；RTP/RTSP；DNS；DDNS；NTP；PPPOE；UPNP；SMTP | |
Protocol | Support ONVIF/CGI | |
General | Protection Grade | IP66 |
Power Supply | DC12V（±25%）/POE | |
Temperature | -30℃--＋60℃ | |
Humidity | 10％--90％ | |
Power Consumption | 3W MAX | |
Install Type | Wall / Ceiling Mounting | |
Dimensions | 64*64*154(mm) | |
Weight | 350g | |
Dimensions
Installation Instructions
1.Take out then Drill Template and stick it on the wall
2.Drill the screw holes in the wall according to the drill template
3. Remove three M6 plastic expansion tubes from the accessories and plug the expanded particles into the positioning hole .
4.Secure the camera to the wall with the supplied Screws
5. Adjust the surveillance angle.
6.Installation of Network Cable Water-proof Jacket (Optional)
QR Code
