This camera uses uses HiSilicon 3516E V200 and 1/2.9" CMOS sensor，the maximum resolution is 1080P, transmission based on IP network through advanced H.264/H.265 video compression algorithm. This product is compact in appearance and equipped with high-efficiency infrared lamps and built-in IR_CUT for night time monitoring. Support interfaces such as alarm input/output, audio input/output etc. The protection grade is IP66 and can be used indoors and outdoors.
Specification Table（ZN-HF-IDVA2200-I3ZP）
2.0MP H265 Motorized Lens IR Dome IP Camera | ||
Model | ZN-HF-IDVA2200-I3ZP | |
Camera | Sensor | 1/2.9" 2.0Mega Progressive Scan CMOS |
Min.Illumination | Color 0.1Lux@F1.2（AGC ON）；0ux@F1.2（AGC ON）with IR | |
Lens | 2.8-12mm | |
IR Range | 30m,Support Smart IR | |
Electronic Shutter | Auto（1/25s~1/100000s） | |
Day / Night | Color/B&W/Light sensitive switch/Mixed mode switch | |
DNR | 2D/3D DNR | |
Anti-Fog | Support (ON/OFF) | |
WDR | DWDR | |
Image Adjustment | Sharpness, Brightness, Saturation, Contrast Adjustable | |
Encode | Compression | H.265//H.264/H.264+/MJPEG |
Max. Resolution | Main Stream:1920×1080@25/30fps | |
Sub Stream:704x480@25/30fps | ||
Bit Rate Control | Support VBR / CBR | |
Bit Rate | 32Kbps~4MKbps | |
Audio Compression | G.711A/G.711Mu/G.726 | |
Audio Bitrate Rate | G.711A(64Kbps)/G.711Mu(64Kbps)/G.726(16Kbps) | |
Noise Reduction | Support | |
Echo Reduction | Support | |
Audio Function | Auto-Gain, Audio input/output Volume | |
Interface | Network Port | 1 RJ45 10M/100M Ethernet interface |
Audio | 1 Audio in/1 Audio out | |
Alarm | 1 Alarm in/1 Alarm out | |
Function | Motion Detection | Multiple Detection Zones, Variable Sensitivity Levels |
Snapshot | Support, Resolution is the max encoding resolution | |
ROI | Support | |
Privacy Masking | 4 Zones for Privacy Masking | |
Security Features | Support Password, Watermarking | |
Text Overlay | Support（Channel Title, Time Title） | |
Alarm | Support Network Anomaly, Mask Alarm and etc. | |
Mobile Phone App | Support IOS and Android | |
Network Protocol | TCP/IP；UDP；HTTP；IGMP；ICMP；DHCP；RTP/RTSP；DNS；DDNS；PPPOE；UPNP；SMTP | |
Protocol | ONVIF/CGI | |
General Parameter | Protection Grade | IP66 |
Power Supply | DC12V（±25%）/ POE | |
Temperature | -30℃--＋60℃ | |
Humidity | 10％--90％ | |
Power Consumption | 5W | |
Install Type | Ceiling Mounting | |
Dimensions | Φ140mmX107mm | |
Weight | 650g | |
Dimensions
It is suitable for industry of public security, finance, transportation, electricity and construction sites, parks, factories, garages, supermarkets, aisles and other places that require day and night monitoring and high-definition picture quality.
Q&A
Q1:Can I use a NVR to connect this camera?
A: Yes, you can use a NVR which has Onvif protocol to connect this camera.
Q2: How are reset the camera?
A: You should login camera in IE and go to "Setting System Advanced Factory Settings"
Q3: How to upgrade my camera?
A: If there is no bug with camera, we don't suggest to upgrade it. If you want to upgrade, please contact with our technical guy
Q4: I can find the ip camera's address, but can't see video.
A: please change the camera ip address to match your router's gateway.
Q5:I can't find the camera's IP camera
A: 1. Exclude network has Secondary routing
2. Power on camera and Use a network cable to connect camera with your computer, make sure computer off network. Then use search tool to search IP address and modify it to match your gateway. If still not, please contact with our technical department
Q6: I can't install ActiveX in my computer.
A: We suggest you use IE browser installed of google and Firefox, IE version less than 10
Q7: What is the Onvif version of this camera?
A: Onvif version 2.4
Q8: Can I use Mac book to view this camera?
A: No, this camera don't support Mac system, it can support Window, Linux
QR Code
