* Built-in wireless 4G transmission module; 4G full Netcom;
* Built-in PTZ,8-direction remote control;
* Adopt 1/3" progressive scan CMOS sensor;
* Adopt advanced H.264/H.265 codec, igh compression ratio, low bandwidth and high image quality;
* Maximum resolution 1920*1080;
* Built-in IR Lamp+white light Lamp,white light lamp warning will be triggered when there is motion detected;
* Built-in Mic and speaker,realize two-way intercom and warning function;
* Support TF card (128G) storage and reset button;
* IP 67, water-proof, fit for indoor and outdoor use.
Camera | Sensor | 1/3" 2.0Mega Progressive Scan CMOS |
Min. Illumination | Color 0.1Lux@F1.2(AGC ON);B&W 0.01Lux@F1.2(AGC ON) | |
Lens | 3.6mm Lens; | |
IR Range | 20m | |
White light | Built-in white light lamp | |
Electronic Shutter | Auto(1/3s ~ 1/10,000s) | |
Day / Night | Auto / Color / B&W (Inside IR CUT) | |
Encode | Compression | H.265 Main Profile /H.264 Main Profile/H.264 BaseLine Profile |
Max. Resolution | Main Stream: 1920*1080@25/30fps | |
Sub Stream: 352*288@30fps | ||
Bit Rate Control | Support VBR / CBR | |
Bit Rate | 256Kbps~2Mbps | |
Audio | Compression | G.711A |
Audio in | Built-in 38dB all-direction mic | |
Audio out | Built-in speaker (8Ω 2W) | |
4G | Network transmission | 4G full Netcom |
LTE | LTE Category 4, Maximum downlink rate:150Mbps,Maximum upstream rate: 50Mbps | |
WCDMA | Support HSPA Release 7 downlink21Mbps,uplink5.76 Mbps WCDMA uplink and downlink 384Kbps | |
Frequency band | ZN-NC-IC2200-DL2F-4GAM(US version) support : | |
Functions | Sound and Light Mode | infrared mode/intelligent mode/full-color mode/intelligent alert mode/license plate mode |
Manual mode | Manual alert mode | |
Motion Detection | Multiple Detection Zones,Variable Sensitivity Levels | |
Two-way Talk | Support voice intercom and alarm sound warning | |
PTZ | Built-in PTZ,8-direction remote control | |
Security Features | Data encryption transmission | |
Mobile Phone App | Support IOS and Android | |
Interfaces | Network Port | 1 RJ45 10M/100M Ethernet interface |
Power Supply | 1 DC12V | |
Reset | 1 reset button | |
SIM card | Support Micro USIM/Micro SIM card | |
TF card | Support Micro SD/SDHC/SDXC card(128G) | |
General Parameters | Protection Grade | IP 67 |
Power Supply | DC12V(±25%) | |
Temperature | -30℃--+60℃ | |
Humidity | 10%--90% | |
Power | 6W | |
Install Type | Wall Mounting | |
Size | 112*162*172(mm) | |
Weight | 465g |
Advantages of the camera
4x digital, clearer details
Real Two Way Audio
Built-in microphone and speaker / Customized new speakers with loud volume . You could talk to anyone nears the camera
PTZ Remote Control
Rotates 360° Horizontally and 90° Vertically . You can control it in the manniu app directly whenever you want and wherever you are
SD Card Storage
Max 128G SD card support which can keep record for around 20days period generally speaking, by using videopark own SD card which has a self-study high performance file system, the lifetime can last for 5 years.
Smart Tracking
When there is alarm triggered, the camera will track the target autmatically and recording will be activated syn.
Easy access via mobile devices in steps
Q&A
Open the APP, scan device body or the shared QR code to add device binding.
1) Check whether the SIM card inserted with right way, the notched section of the SIM card faces outwardsthe as follows:
2) Ensure that the SIM card is normal, with sufficient data traffic and no arrears. The status of the SIM card can be inquired through the [4G Service] page. If there is no information on the [4G Service] page, please contact the after-sales for help.
1) Log in to the APP, through the original binding account in the list of equipment, select the device to unbind, click [Settings], and click [Remove the equipment]. After the device is successfully untied, you can bind the new account.
2) If you forget the original binding account, you can use the new account to add equipment, fill in relevant materials, and apply for unbinding. There will be relevant technical personnel to help untie the binding.
You can choose [forget the password] on the mobile phone APP login interface for password reset, or through the mobile phone number, obtain the mobile phone verification code, verify login.
1) Check if the SIM card has traffic. Through the mobile phone APP, in the device list, select the corresponding device, click [4G Service] to see the traffic usage, whether the traffic has been exceeded. Select the [My Package] to see if the validity period has expired.
2) The traffic card still has traffic, and the package is not expired. Please contact the after-sales service, provide the corresponding traffic card number and equipment serial number, they will help to confirm the equipment and SIM card status in the background.
3) If background query is normal, please power off and restart the device, check whether the PTZ will rotate during the power-on process, cover the light green origin (photosensitive) in front of the camera, check whether the infrared light will be on, If there is no response, replace the power cord plug. If there is still no response, there may be a hardware failure. It is recommended that you contact our after-sales hotline: 400 088 9280.
QR Code